PLASTIC MOULDED GEARS
 

Vishal introduces (Acetal copolymer resin-like delrin) white plastic moulded 20 DP gears range. This is very strong material and requires no lubrication for gears.

           
 

    

 

 Standard Gears :
 
 

Gears with 12, 16, 20 and 24 teeths are available without center aluminum bush but with 3/8 dia. D slot.
Available with 24, 30, 36. 40, 48, 64, 80, 96,108 and 180 teeth & have center aluminum bush with 3/8" hole with 3 nos. screws / tapped holes provided for easy mounting.

 
 

  Compound Gear :
 
 
(Gear / pinion assembly single piece moulded) are available with following gear ratio...
1) 1:2 ---- 20 x 40 teeths
2) 1:3 ---- 16 x 48 teeths
3) 1:4 ---- 12 x 48 teeths
4) 1:1.875  16 x 30 teeths
 

These simple and compound gears can be used in special purpose machines and are available ex-stock or within 1 to 2 weeks. It can also be coupled with 'vishal-syn' A.C. Synchronous motors or D.C. stepping motors or PMDC geared motors.
 
For bulk requirement we can develop moulded gears with other module / D.P. or teeth as per your specific requirements and drawing.
 

   

 DIMENSIONS:

 Gear with Center Aluminium Bush 20 DP
 
 
TEETH
AØ mm O.D.
B mm
C mm max
DØ
EØ mm Hole
20
28
13
16
3/8"
20 max.
24
33
13
16
3/8"
20 max.
30
41
 12
16
3/8"
20 max.
36
48
8
16
3/8"
20 max.
40
53
8
16
3/8"
25 max.
48
63
8
16
3/8"
25 max.
64
84
8
16
3/8"
30 max.
80
104
13
16
3/8"
30 max.
96
 124 13 16 3/8"
30 max.
108 139.7 13 16 3/8"
30 max.
180
231
15
17
38.25mm
54 max.
Compound Gear 20 DP

 
TEETH
GEAR RATIO
AØ
EØ
B
C
DØ
20 X 40
1:2
53
27
8
13
3/8"
16 X 48
1:3
63
23
8
13
3/8"
12 X 48
1:4
63
18
12.5
16
3/8"
30 X 16
1:1.875
41
23
12.5
16
3/8"

In view of the 'VISHAL' policy of continuous development & improvement the information in this leaflet is subject to change without notice.

Download Catalouge

A.C. Synchronous Motor, D.C. Stepping Motor, PDMC Geared Motor, Plastic Moulded Gears, Geared Synchronous/Stepper Motor.
@ 2006 Vishal Electromag Industries